Comparing Your World

Website: http://www.as.wvu.edu/~scidis/vision.html

 

Modifications for The Blind

General Strategies

*  Bring to the student's attention science role models with disabilities with a similar disability to that of the student. Point out that this individual achieved by a combination of effort and by asking for help when needed.

    * A wide selection of magnifying devices are available that can be used by visually impaired students to assist in reading or working with objects that need to be observed.

    * A screen reader, low vision projection screen, or an item like outSPOKEN or a similar system can be used to read a computer screens.

    * A screen magnifier may be used to enlarge print on a computer screen.

    * General Information Access for Persons with Vision Loss

         1. Visual material needs to be accompanied by a verbal description. If you are demonstrating how to use a piece of equipment, be sure to describe the equipment and what you are doing to operate it. Read overheads aloud and describe the content of slides (see note below about large print). In a conference presentation setting, you will probably want to provide all descriptions yourself. If you are showing a videotape, describe the action. If you distribute videotapes as handouts, any action or an explanatory text that is crucial to understanding the text of the presentation should be narrated.

         2. If there are multiple speakers (such as a panel), have each speaker introduce himself or herself to the audience so that the speakers' voices are keyed for the audience as to their identity.

         3. Be certain that your presentation can be clearly heard by everyone in the room and repeat all questions from the audience, prior to answering.

         4. Handouts should be available in large print, audiotape, computer disk, and/or Braille formats. If this is not possible prior to your presentation, note the various individuals' preferred formats and then make your materials available to them within a short time after your presentation.

         5. Large Print * - People who have some functional vision may be able to see print if it is large enough. Prepare print information on white paper with sharp, black ink. Standard print is generally 10-12 point type. Large print is 16-18 point and up, generally an enlargement setting of 160-175% on a copy machine. In the case of documents that already exist in print form, use a copy machine to enlarge each page onto 11 x 17 paper. Try darker settings on the copy machine to increase contrast without producing streaks. Many computer programs offer a variety of font types and sizes.

            (On most newer versions of browsers, you can select Text Zoom from View Menu of the browser for larger view).

 

Teacher Presentation

    * By verbally spelling out a new or technical word, you will be helping the student with a vision impairment, as well as for other students.

    * An enlarged activity script, directions, or readings of a detailed lesson can be used for a low vision person and for use in describing tactile 3D models .

    * Use an overhead projector to show step-by-step instructions. Mask all the instructions except the one(s) that you want to present.

    * Use an opaque projector whenever possible to enlarge a text or manual.

    * All colored objects used for identification related to a lesson, experiment, or other directions should be labeled with a Braille label maker or otherwise tacitly coded for most students with vision impairments.

    * Describe, in detail, visual occurrences, visual media, and directions including all pertinent aspects that involve sight.

    * Use a sighted narrator or descriptive video (preferably the latter) to describe aspects of videos or laser disks.

    * Describe, in detail, all pertinent visual occurrences or chalkboard writing.

    * Where needed, have lesson or direction materials Brailled, use an enlarged activity script, or recorded ahead of time, for class handouts.

    * Have tactile 3D models, raised line drawings, or thermoforms available to supplement drawings or graphics in a tactile format when needed.

    * Whenever possible, use actual objects for three dimensional representations.

    * Modify instructions for auditory/tactile presentation.

    * Use raised line drawings for temporary tactile presentations.

    * Use an overhead projector, chalkboard, graphs, or slides as you would normally, but provide more detailed oral descriptions, possibly supplemented with thermoforms where appropriate.

    * Allow student to use a tape recorder for recording classroom presentations or the text.

    * Make all handouts and assignments available in an appropriate form: e.g., regular print, large print, Braille, or on a cassette, depending on the students optimal mode of communication.

    * Use a monocular or a private eye (electronic miniature television) or similar devices for long range observations of chalk board or demonstration table presentations.

 

Laboratory

1) Describe and tactually/spatially familiarize the student with the lab and all equipment to be used.

2) Consider alternate activities/exercises that can be utilized with less difficulty for the student, but has the same or similar learning objectives.

3) Use an enlarged activity script, directions, or readings for a low vision student (or taped script for a student who is blind) for use with tactile 3D models.

4) Make all handouts and assignments available in the appropriate form for the student: e.g., regular print, large print, Braille, or tape depending on the students optimal mode of communication.

5) Assistance may be needed for converting certain laboratory materials from a visual to a tactile format.

6) Have the student with a vision impairment do a trial run on the equipment before the activity.

7) Allow more time for the laboratory activities.

8) Always try to keep materials, supplies, and equipment in the same places.

9) Use a microprojector or similar device to help the visually impaired student to examine images from a microscope.

10) Place the student and/or tape recorder an appropriate distance from the activity to permit hearing and/or the recording of results or observations.

11) Use an overhead projector or opaque projector to show step-by-step instructions. Mask all the instructions except the one(s) that you want followed for students with vision impairments.

12) Use Descriptive Video for videos or laser disks. If Descriptive Video is not available, use a sighted narrator to describe movies, videos, laser disks, or slides.

13) Provide means for the acquisition and/or recording of data in an appropriate mode for the student.

14) Use tag shapes for showing relationships (such as distance comparisons) buttons, or other markers on a "layout" board.

15) A Braille label maker will be useful for identifying materials and containers in the laboratory for the vision impaired student with a vision impairment who reads Braille.

16) Make equipment available that the student with a vision impairment can access in interpreting and understanding the results of laboratory exercises (e.g. audible readout voltmeters, calculators, talking thermometers, magnifiers, etc.

17) Use a hot plate for heating instead of Bunsen burner.

18) Label material, supplies, and equipment with regular print, large print, and/or Braille, as appropriate for the vision impaired student.

19) Pair the student with a vision impairment with a sighted student. Then have the non-impaired student describe the activities and outcomes as they are observed.

20) A low vision projection screen can be use to magnify images up to 720X.

21) Use a portable communication board to provides auditory scanning of laboratory materials such as: pictographic symbols, letters, and/or words.

22) When using a computer, the student with a visual disability can use a voice input device or a remote voice system to verbally enter commands.

23) Prior to the enrollment of a student with a visual impairment in class, obtain laboratory equipment that have available ability to produce adaptive outputs such as: a large screen, print materials, or various audio output devices.

24) Various Braille devices can be used to assists vision impaired students when reading.

25) For "reading" the outputs of balances and other instruments, one can use a Braille N' Speak device (Blazie Engineering)

26) Have a lab assistant help you if necessary to make sure that students with visual impairments are being assisted.

 

Group Interaction and Discussion

    * Describe and tactually/spatially familiarize the student to the classroom.

    * Place the student and/or recorder an appropriate distance from the activity to permit recording of material.

    * Use a tape recorder.

    * If the student is partially sighted, be sure he/she is seated where lighting is appropriate.

    * Use a note taker who takes notes in the appropriate mode.

 

Text Reading Systems

    * Paid or volunteer readers or writers can assist a student with a visual impairment with texts, materials, and library readings .

    * Offer to read, or arrange to have read, written information for a person with a visual impairment, when appropriate.

    * Arrange, ahead of time, for audio book acquisition of the text or other reading materials through the Talking Book Service, Recordings for the Blind and Dyslexic, text reading systems, or audio output devices.

    * Various Braille devices can be used to assists vision impaired students when reading.

 

Field Experiences

    * Make all handouts, safety information, and assignments available in an appropriate form (e.g., regular print, large print, tactile Braille, or cassette).

    * Consider alternate activities/exercises that can be utilized with less difficulty for the student, but has the same or similar learning objectives.

    * Use a sighted guide.

    * Do detailed description and narration of objects seen in science centers, museums, and/or field activities.

    * The use of a laser cane or mowat sensor can be useful in assisting the student in unfamiliar surroundings.

    * An enlarged activity script, directions, or readings for descriptions of a field/activity for a low vision person to use with field observations.

    * Suggest that the student use a standard tape recorder.

 

Research

    * Review and discuss with the student the steps involved in a research activity. Think about which step(s) may be difficult for the specific functional limitations of the student and jointly devise accommodations for that student.

    * Use appropriate lab and field strategies according to the nature of the research.

    * Various Braille Devices can be used to assists vision impaired students when reading.

    * Suggest that the student use a tape recorder with a sighted person on the various activities.

    * Research on Mowatt sensor

 

Testing

    * Make arrangements for tactile examinations, if touch is not normally permitted (say, in a museum) then contact the curator for tactile access to a museum display items or say, in a zoo for access to a plant/animal species and/or collection).

    * Place the student being tested close to the activity if tactile examination is necessary.

    * Present examinations in a form that will be unbiased to visually impaired students. Ask the student for the approach he/she finds to be most accessible.

    * One possible accessible method is to record test questions on tape and have the students record their answers on tape in an area which has minimal disturbance for other students.

    * Use an enlarged activity script, directions, or readings to go along with the testing material.

    * Allow more time.

    * Allow calculators to be used during the test.

    * Make use of larger print (e.g. 14 pt; 20 pt sized or as needed).

    * Make use of visual magnification (magnifier or magnifying machine), audiocassette, Braille/Braille graphs/Braille device for written responses, large block answer sheet.